Bamboo chopping board split down the middle. I glued it up and want to refinish it. Can I use polyurethane as that is what I have? Would it be foodsafe once fully dried?
/r/finishingBBQ scraper has some black spots on it. I think it's mildew? Please help!
/r/finishingNeed some advice, have a 80m2 of floor and a flight of stairs in this condition. Any advice on where to start would be greatly appreciated
/r/finishingAny protection polish I can apply to protect my wood from sunlight?
/r/finishingHow to finish pine wood ceilings
/r/finishingFloor Finish problems - Question for hardwood floor finish
/r/finishingReclaimed Island Top. Thank you for all the help!!
/r/finishingNice solid wood table needs a face lift, thoughts on how to even out the finish?
/r/finishingPreparing to gel stain: how far do I sand?
/r/finishingThis was my first time making my own colors for a dye stain gradient - dye suspended in denatured alcohol, tinted deft waterbased poly x 4 coats all sides, trewax polish for that satin shine. Will post full set of finished doors asap!
/r/finishingNewbie here, varnish applied to mahogany is giving all these white specs in the grain. Technique problem or wrong finishing product?
/r/finishingLooking for help. Sprayed Arm-r-seal with Fuji Sprayer. 1.3 tip. Thoughts on why it looks like this?
/r/finishingHow do I fix these dull (dry?) areas on the front edge of my desk?
/r/finishingWhat is the best way to finish wood like this porous parts? (I know I'll need to epoxy fill the holes)
/r/finishingTips on staining poplar? I'm planing to build a coffee table out of it in lieu of jus pine but it appears to stain kinda strange. This just how it general stains or is there an issue with my technique? (The stains are red chestnut, red oak, and honey with a clear satin polyurethane coat on top)
/r/finishingPaint/vinyl with what sealant you restore this?
/r/finishingI know we have other priorities right now, but does the finish quality on the Presidents podium bother you as much as it bothers me? Surely the USA can do better.
/r/finishingThis is my sons clmbing frame in our garden. Its outdoors and subject to the elements. We are in South Africa, so we have a bit of rain in the summer, but dry winters, and a lot of harsh sun. I want to paint it, would I need to prime it or put an undercoat on it first? What paint would you recommend
/r/finishingNew table - no idea how to care for the finish, do not know what kind of finish it is
/r/finishingFirst coat of polyurethane with a foam brush. How do I fix all the cracks with dry white accumulated poly in them?
/r/finishingLooking for Toner Help!
/r/finishingMy kitchen cabinets largely look great except for the ones under my sink. How can I fix these? What do I buy supplies and product wise?
/r/finishingWhat should I do?
/r/finishingHow to clean this mirror? Looks like rust marks? Need advice. More pictures in comments.
/r/finishingNeed recommendations for walnut butcher block finishes
/r/finishingIn the process of restoring this credenza. Notice the top—it’s somewhat splotchy. I’m assuming there has been water damage, but am unsure. After giving it a thorough sand and applying a light coat of stain, I noticed the stains still prominent. Any tips on how to remedy this? Thanks!
/r/finishingRestoring this Lane First Edition side table. First time restoring and I confused about what to do next.
/r/finishingCitristrip only removed a bit but still won't come off!
/r/finishingJust got done with this old table top I repurposed as a desk and shelf. Should I coat it in polyurethane or wax?